What are the characteristics of self-adhesive label stickers
- 2021-06-04-
In a cold environment, the viscosity of the self-adhesive material has the characteristic of weakening as the temperature decreases. Often customers report that problems such as glue non-stickiness, flying marks and drop marks are all related to temperature. The following aspects are very important for the use of stickers in winter:
1. The storage environment temperature of the label should not be too low. When the self-adhesive material is placed outdoors or in a cold environment, it is easy to cause the material, especially the glue part, to be frostbited; if it is not restored by proper heating, the viscosity of the self-adhesive will be therefore For loss or loss, when this happens, place the material in a greenhouse above 15°C for more than 24 hours to restore the glue to its viscosity.
2. The processing environment temperature is very important for the smooth processing of the material. If the temperature is too low, after the viscosity of the material is reduced, poor printing, die-cutting flying marks, and striping flying marks and dropping marks will occur during processing, which will affect the smooth processing of the material; for the usual "summer match" materials, it is recommended to be at 15°C For use in the above environment, the "transition/winter configuration" can be used in an environment of 10~20℃.
3. The labeling environment temperature should meet the product requirements. Any kind of self-adhesive material has a related labeling temperature. Below this temperature, the adhesiveness of the self-adhesive will be limited, which will cause problems such as weak labeling and warping. In addition, the labeling temperature is lower. It will also cause the phenomenon of flying labels during the labeling process; for the usual "summer distribution" materials, it is recommended to use them in an environment above 15℃, and the "transition/winter distribution" can be used in an environment of 10-20℃.
4. label pretreatment, this is very important in cold regions. If the temperature of the label material itself is low due to transportation and storage conditions that cannot meet the requirements, or even frostbite, although the processing or labeling environment temperature meets the requirements, the adhesive viscosity will also be affected due to the inability to recover in time. Therefore, under the above circumstances, the label material should be placed in an environment that meets the low labeling temperature or higher for a period of time, so that the temperature of the label material itself rises, and the viscosity is restored before processing or labeling.